Administration Sets

20 drops/ml. Regulation dial with range of 10 - 250ml/hr Drip chamber with highly transparent upper part and 15 µ filter Practical hand grip for one handed use 3mm diameter tubing 180cm length Side clamp Screw tight luer lock fitting to prevent accidental disconnection

Latex-free solution giving set. 20 drops per ml 15 micron filter 3mm internal tubing diameter 155cm length Roller valve Y-site injection point Latex free, flexible transparent drip chamber Luer lock connection Sold singly

1.9 metres long, suitable for smaller pets in normal kennelling environments. 2 Y ports, one near the controller and one ideally placed near the end luer, a luer connector and movable luer lock/push fit end connection. Distal tubing is virtually kink-proof and allows easy looping of line even in the smallest of pets. Drip chamber is filtered and supplies 60 drops/ml.

These Optima giving sets are an excellent choice for routine infusion by gravity or an infusion pump. Offering either a 20ml or 60ml drop size, with 2 length sizes - This product will suit your needs for a range of patient and kennel sizes. Equipped with vented and filtered chambers, these sets also feature a proximal T port injection site with a finger guard for safer IV access. The set also boasts a C-Clamp and roller valve for optimal gravity control. The Optima giving set range is also fully kink-proof end and resilient twist-resistant mid-section tubing.

Coiled kink-resistant giving sets. Total workable length: just under 5 metres 2 x Y injection sites Push fit and taperfit swivel luer Excellent V track controller In line connector to enable other accessories to be added. Kink-resistant tubing 2 options available

For rapid pressure infusion and irrigation purposes. Transparent - allows clear 360° view on the fluid bag and the fluid level Wrap-around design with hook enables easy fixation of most fluid bag configurations Fluid bag can be replaced quickly and easily Consistent pressure on the complete fluid bag Large volume of inflator enables rapid inflation and features a 3-way stop cock for pressure control & quick deflation  Precise pressure range from 0-300mmHg Hygienic - smooth surface allows easy cleaning and disinfection Reusable Latex-free 3 sizes available: 500 ml, 1000ml and 3000ml Sold individually

Prevent patients from getting tangled in their infusion set, with the Perfuvet® Twist kit - rotating infusion fixation set.  This anchored, and rotating infusion fixation set prevents the animal from tangling the tubing or blocking fluid flow. Ideal for fractious hospitalised patients. The spiral tubing allows ease of movement and prevents excessive pulling on the catheter, saving time, improving the safety of hospitalised animals, and is easy to use. It can be used on any sized animal. Perfuvet® Twist is easily attached to the cage; the base can be left on the cage and reused as often as necessary. How it works: The base can be attached to your patients cage. Equipped with double-sided tape for secure, fast attachment, then easily screwed into place with the 4 screw holes provided. There are two clasps that attach the infusion tubing to the base, allowing unlimited rotation. 3 sets of single-use 3m length sterile spiral PVC tubing with a Luer-Lock tip and a ring for attaching to the collar is provided. This attaches easily to the base.

Single-use 3m length sterile spiral PVC tubing - for the Perfuvet® Twist kit. With a Luer-Lock tip and a ring for attaching to the patient collar. The tubing also attaches easily to the Perfuvet® base.

The EVA20 Infusion Line Giving set is designed to suit virtually any kennel or patient. It combines some of the best features of both the Optima and ModuFlo ranges to offer the best combination of performance, function, and value. This set is 250cm in length, and features a proximal and distal Y-port, and a vented and filtered 20 drop/ml chamber. The set includes a C-Clamp and roller valve for optimal gravity control, and has fully kink-proof end and resilient twist-resistant mid-section tubing. This giving set has a 80cm section of pump compatible tubing running between the chamber and the first port and performs well on most infusion pumps, including: VetPro 2000 Niki V4 Optima VS Aqupharm Alaris GW Additionally, this single piece set has a low priming volume of 0.5ml and suits virtually any kennel or patient size.

Double spike for rapid transfer of medication or diluent between rubber stoppered containers. Components not made with DEHP or rubber tree latex. Components not made with DEHP or rubber tree latex Available sterile packaged. BPA Information - Not Made With BPA DEHP Information - Not Made With DEHP Latex Information - Not Made With Natural Rubber PVC Information - Not Made With PVC Total Shelf Life (Months) - 060 Ordering Unit - Case Units per Case - 100 Dimensions per Case - 12.563 x 9.563 x 6.000 inches Shipping Weight per Case - 2.341 lb  Sterile - Yes  Sterilization Method - EO 

This standard “Y” extension is 25cm in length with a fixed male luer lock connection. Ideal connector for small animal use. Suitable for direct connections to catheters. Priming (one side) 0.8ml, full set 1.1ml.

Spike / fix male Luer lock, Hydrophobic Air Inlet Filter, 15 µm Drip Chamber Filter, 20 drops/ml, vented/unvented, 3 mm id, Roller Clamp, PVC / non PVC, DEHP free, Latex free Y-site 6.9 ml/1 m at 40°C 180 Spike Fix Male 100

Vented Blood Giving Set with TPE Tubing and Red Roller Clamp Ensure reliable and efficient blood transfusion with our Vented Blood Giving Set, designed with patient safety in mind. This set includes a vented spike for easy and precise piercing of blood bags, allowing for smooth air flow during transfusion. The tubing is made from TPE (Thermoplastic Elastomer), a non-PVC material known for its flexibility, durability, and reduced risk of leaching harmful chemicals, ensuring safe administration.    

Unvented Blood Giving Set with Red Roller Clamp The Unvented Blood Giving Set is a great choice for veterinary professionals seeking safe and reliable transfusion equipment. Designed with a focus on safety, durability, and ease of use, this set is perfect for veterinary practices and clinics. Featuring a 200 μm Drip Chamber Filter, the unvented design ensures smooth, controlled blood flow without the need for venting. The set also includes Non-PVC/PVC tubing, which is DEHP-free and latex-free, providing flexibility and safety for patients.  A red roller clamp offers precise flow rate control, allowing easy adjustment for administering blood or fluids at a rate of 6.9 ml/1m at 40°C. The Male Rotating connector ensures a secure and leak-proof connection to the IV catheter, further enhancing the reliability of the device.

T-Connector Luer Lock

20dpm 15 µm filter 3mm diameter tubing, 175cm length Accublu pump friendly tubing -easily see which section of tubing is pump compatible A single Y-point injection site A roller-clamp with a nifty notch to allow quick temporary closure of tubing A FullStop priming vent allowing set to be primed without losing any fluids Screw-tight luer lock fitting to prevent accidental disconnection

60dpm 15 µm filter 3mm diameter tubing, 175cm length Accublu pump friendly tubing -easily see which section of tubing is pump compatible A roller-clamp with a nifty notch to allow quick temporary closure of tubing A FullStop priming vent allowing set to be primed without losing any fluids

20 drops per minute 15 micron filter 3mm diameter tubing, 180cm length 2 needle free ports reducing risk of needle stick injury Bite & kink resistant tubing near catheter site A FullStop priming vent allowing set to be primed without losing any fluids Screw-tight, rotating luer lock fitting to prevent accidental disconnection A roller-clamp with a nifty notch to allow quick temporary closure of tubing and G-clamp 18ml priming volume Accublu pump compatible tubing, easily identifiable section

20dpm 15 µm filter 3mm diameter tubing, 265cm length 2 Y injection points situated to enable usage from outside cage and/or by the animal Bite & kink resistant tubing near catheter site Accublu pump friendly tubing -easily see which section of tubing is pump compatible A FullStop priming vent allowing set to be primed without losing any fluids Superior air filter in hydrophobic air vent withstands higher hydrostatic pressure reducing leakage from air vent Screw-tight luer lock fitting to prevent accidental disconnection

Flow regulator up to 250 ml/hr improves accuracy when not using a pump rather than drop counting 60dpm 15µm filter 3mm diameter tubing, 210cm length 2 y-injection ports G-clamp A FullStop™ priming vent allowing set to be primed without losing any fluids  Screw-tight luer lock fitting to prevent accidental disconnection Sold individually

Female to male Leur Lock connector. Suitable for all species. Removable injection port allowing for second line connection.  Set Length: 1.3cm Vent: No Micron Filter: No G Clamp: No Y-Injection Port: No Needle Free Valve: No Leur Lock Connector: Yes FullStop™ Priming Vent: No Priming Volume: <0.2ml

Light and easy to secure line connector with injection port. Suitable for small animals, e.g. puppies & kittens.

Coiled tubing extends to 360cm, returning to only 100cm in length, reducing the risk of your patient becoming tangled. 20 drops per minute Total line length of 360cm Returns to coil every time 15 micron filter 1 Injection Port Rotating Leur Lock

The T-connector with needle-free valve port is a removable needle-free valve, allowing for a second line connection.