Circuits & Connectors

Straight anaesthesia connectors. Ideal for connecting 22mm scavenging tube to Aldasorber Various sizes available Sold singly

Ideally suited to those that prefer to use the Mapleson A Magill System, but would like the APL valve positioned proximal to the reservoir bag. 

Replacement Y-connector for mini lack circuit. Sold individually.

Twin tube breathing system for use with circle systems. Lightweight smooth bore 22mm tubing with fixed Y-piece 22mm x 2m Sold singly Also available as antimicrobial version, available  here .

Based on the Jackson Rees modification and is suitable for smaller animals Supplied with a closed 500ml rebreathing bag 1.8m long

Jackson-Rees' modification of the Ayre's T-piece (alternative name Mapleson F system) connects a two-ended bag to the expiratory limb of the circuit, gas escaping via the `tail' of the bag. This allows respiratory movements to be more easily seen and permits intermittent positive ventilation if necessary. Intermittent positive pressure ventilation may be performed by occluding the tail of the bag between a finger and thumb and squeezing the bag.

2x smooth bore tubing 1.6m long with Y-piece for mini lack circuit Excludes manifold

A co-axial system in which the fresh gas flows through a narrow inner tube within the outer corrugated tubing. The Bain circuit is a modification of the Mapleson D system. Functions in the same way as the T-piece, except that the tube supplying fresh gas to the patient is located inside the reservoir tube. 1.6m tubing with 22M/15F connector only - no bag or valve

Twin tube breathing system for use with circle systems complete with adjustable Y-piece swivel neck Lightweight smooth bore 22mm tubing. 1.8m long

Straight anaesthesia connector for use between circuits. 15mm F - 22mm F. Sold individually.

D-fend water traps are designed to protect the gas measurement system from moisture, humidity and contaminants, which can harm the gas module and affect measurement accuracy. Indicated for use with CARESCAPE* Respiratory Modules monitoring respiratory and ventilatory parameters in anaesthesia. In anaesthesia this water trap should be replaced every two months, or when the patient monitor so indicates. During the water trap's operating life the water container can be emptied as often as necessary. Compatible Products:* E Series Parameter Modules M Series Parameter Modules TUFFSAT Vaporizer TEC 7 E-CAiOV *(This part may be compatible with the following systems. You should check your owner's manual to confirm.) Sold individually.

This paediatric breathing system uses a 15mm tube to reduce circuit volume, especially important when using on smaller patients. 15mm x 1.6m Sold individually.

KAB Circle Absorber (22mm Metal T-Connector supplied separately) Sturdy, autoclaveable circle absorber which can be used on animals from 5kg to 70kg, depending on what size tubing 22mm metal T-Connector for circle absorber is required to connect the circle absorber to the anaesthetic machine or trolley. This connector and the tubing which goes between the T-connector and the absorber is supplied separately Anaesthetic gases enter the absorber via the tubing from the T-connector directly into the inhale side. This results in less gas wastage and faster reaction of the animal to the anaesthetic agent compared to other absorbers where the gas goes directly into the soda lime Rebreathing bag is sold separately

A co-axial system in which the fresh gas flows through a narrow inner tube within the outer corrugated tubing.The Bain circuit is a modification of the Mapleson D system. Functions in the same way as the T-piece, except that the tube supplying fresh gas to the patient is located inside the reservoir tube. Inspiration - The patient inspires fresh gas from the outer reservoir tube. Expiration - The patient expires into the reservoir tube. Although fresh gas is still flowing into the system at this time, it is wasted, as it is contaminated by expired gas. Expiratory pause - Fresh gas from the inner tube washes the expired gas out of the reservoir tube, filling it with fresh gas for the next inspiration.

Antimicrobial twin tube breathing system for use with circle systems. Proven to help reduce the incidence of MRSA infection and other organisms including: Staphyloccus epidermis, Pseudomonas aeruginosa, Klebsiella pneumoniae, Acinetobacter calcoaceticus, Escherichia coli Lightweight smooth bore 22mm tubing with fixed Y-piece 22mm x 2m Sold singly Standard (non-antimicrobial) version available here .

Fixed elbow connector with luer lock port. 15M and 22M/15F outlets Non-sterile Luer lock port for secure fitting Sold individually

This safety cap only fits 22mm Y Piece.

The Hydro Therm 3 is a dedicated HME designed to replicate the functions of the body's upper airway by conserving expired heat and moisture and returning these to the patient during inhalation.

We have a large selection of patient connectors and accessories, making sure that you are covered with everything you need. Find our Anaesthesia Connectors, an essential part of anaesthesia systems, ensuring a smooth patient breathing circuit of tubing.

This is a fixed elbow connector, available in size 15M-22M/15F.

Double swivel elbow, 15M – double flip top cap with seal – 22M/15F. **Alternative to Sontek Bronch-Safe Swivel** Double swivel elbow provides added mobility at the patient connection, with a variety of ports for all applications. For added safety all lntersurgical port caps are tethered to the connectors, to prevent loss or misplacement in use.  Flip top cap with 7.6mm port – for connection of all standard 7.6mm probes or suctioning. Double Flip top cap with seal – opening the first tab on the cap allows for the introduction of a fibre optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

It is intended to for use with the Slippery Sam and silicone Tomcat catheters. 

Type of filter = Electrostatic Filtration efficiency = >99.99% Moisture loss = 12.3 mg H2O/l Calculated moisture return = 26.8 mg H2O/l Resistance at 11L/min = 1.0 cm H2O Resistance at 15L/min = 1.4 cm H2O Compressible volume = 11 ml Weight = 11 g Connectors = 15M-15F Minimum tidal volume = >35 ml

Darvall (Mini) Lack Circuit Incorporating Darvall’s new Minimum Dead Space Y-piece (virtually half the dead space of standard Y-piece) Controllable anaesthetic exhaust with linear set control valve – to allow precise control of the anaesthetic bag Smooth Wall Tubing Low volume, low resistance Perfect choice for tiny patients Darvall Lack Manifold Kit with 12mm Smooth Bore Tubing This product has a 22 fitting for the bag therefore, any bag that is 22F can be used. You can find these on our website:  R425-8 ,  R414 .