Burs

FG (Friction Grip). Manufactured in the UK High quality with stainless steel shank and low neck braze for maximum strength. Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time. Supplied in blister packs - Back wrapper peels off easily. One at a time access - remaining burs stay secure and well protected. Pack of 5.

Friction Grip (FG) Burs - Normally used in high speed handpieces. FG Burs have a 'rounded end.' Fit standard and high speed handpieces. Manufactured in the UK. High quality with stainless steel shank and low neck braze for maximum strength. Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time. Supplied in blister packs - Back wrapper peels off easily. One at a time access - remaining burs stay secure and well protected. Head diameters: Size 0.5: 0.6mm Size 1: 0.8mm Size 2: 1mm Size 4: 1.4mm Size 6: 1.8mm Size 7: 2.1mm Size 8: 2.3mm Pack of 5.

Right Angle (RA) Burs Have a small notch at the end of the shank for locking the bur in place. Commonly used in electric micrometers and low speed air driven handpieces. Manufactured in the UK High quality with stainless steel shank and low neck braze for maximum strength. Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time. Supplied in blister packs - Back wrapper peels off easily. One at a time access - remaining burs stay secure and well protected. Pack of 5.

Friction Grip (FG) Burs - Normally used in high speed handpieces. FG Burs have a 'rounded end.' Fit standard and high speed handpieces. Cross Cut Taper Fissure Burs - used for sectioning teeth. Manufactured in the UK High quality with stainless steel shank and low neck braze for maximum strength. Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time. Supplied in blister packs - Back wrapper peels off easily. One at a time access - remaining burs stay secure and well protected. Pack of 5.

HP Burs - suitable for rabbit dentistry and orthopaedics. The shanks are 44.5mm long providing the extra length needed for use in large companion, domestic or exotic animals. Manufactured in the UK High quality with stainless steel shank and low neck braze for maximum strength. Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time. Supplied in blister packs - Back wrapper peels off easily. One at a time access - remaining burs stay secure and well protected. Pack of 5.

Normally used in high speed handpieces. Made with the finest Swiss-made steel shanks. Triton™ bonded to double the strength of diamond adhesion and improve performance. FG Burs have a 'rounded end.' Fit standard and high speed handpieces Sold singly

HP Burs - suitable for rabbit dentistry and orthopaedics. The shanks are 44.5mm long providing the extra length needed for use in large companion, domestic or exotic animals. Made with the finest Swiss-made steel shanks. Triton™ bonded to double the strength of diamond adhesion and improve performance. Sold Individually.

Friction Grip (FG) Burs - Normally used in high speed handpieces. FG Burs have a rounded end. Fit standard and high speed handpieces Manufactured in the UK High quality with stainless steel shank and low neck braze for maximum strength. Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time. Supplied in blister packs - Back wrapper peels off easily. One at a time access - remaining burs stay secure and well protected. Pack of 5

Friction Grip (FG) Burs - normally used in high speed handpieces. FG Burs have a rounded end Fits standard and high speed handpieces Manufactured in the UK High quality with stainless steel shank and low neck braze for maximum strength Fast, smooth, vibration free performance, delivering patient comfort and reduced operative time Supplied in blister packs - back wrapper peels off easily One at a time access - remaining burs stay secure and well protected Pack of 5

Friction Grip (FG) Burs - Normally used in high speed handpieces. FG Burs have a 'rounded end.' Fit standard and high speed handpieces. The shank of each bur is nickel plated to protect against corrosion and to provide a firm grip in the handpiece chuck. Contact us for more information. Pack of 5.

FG 379 Shape, 023 dia. 5mm head. High level of performance and durability. Exclusive, multi-level diamond application assures a maximum, uniform crystal coverage for rapid, smooth and comfortable cutting. Only natural diamonds are used for superior cutting efficiency and long instrument life.

Pear shaped - to create an undercut for retention of filling materials. Pear shaped burs have a rounded edge unlike inverted cones. These burs are intended to be single use and the cost factored in to each procedure Head Size - 012 Cutting Length - 4.0 Pear 332L

These burs are intended to be single-use and the cost factored into each procedure. iM3 dental burs are made from the highest quality materials. Diamond dental burs are suitable for high-speed and low-speed handpieces. Head Size - 016 / 023 Cutting Length - 3.8 / 5.0 Diamond Football Medium / Fine Grit

These short shank burs (16 mm) are preferred for use in the confines of the feline oral cavity. These instruments are intended to be single-use and the cost is factored into each procedure.  

  These short shank burs (16 mm) are preferred for use in the confines of the feline oral cavity. These burs are intended to be single use and the cost factored in to each procedure. Xcut Fissure Taper 700 Head Size - 010 (1.0mm) Cutting Length - 4.1

The extra long (60mm) HP diamond bur is used for the reduction of rabbit & rodent molar teeth. The diamond bur causes less trauma and produces less heat than traditional Carbide versions. The long bur can be used in the D2230 soft tissue protector.

iM3 Dental Bur FG Surgical 25mm Cross Cut Taper Fissure is made of the highest quality carbide steel.  This bur is used mainly for veterinary dental surgical extractions in general practice to remove vestibular bone, remove bone mesial and distal to tooth roots and section teeth in large and medium-size dogs and some small dogs and larger cats. Surgical length burs are 25mm long and not suitable for all highspeed handpieces and may void the warranty. These burs are intended to be single-use and the cost factored in to each procedure. Pack Of 5 Autoclavable Bars Xcut Fissure Taper

Round burs are helpful for the removal of bone and exposure of a firmly rooted tooth root. Surgical length burs are 25mm long and not suitable for all highspeed handpieces and may void the warranty. These burs are intended to be single use and the cost factored in to each procedure. Pack Of 5 Autoclavable Bars

The Diamond Dental Bur Truncated Cone FG 626 medium is made with the finest Swiss-made steel shanks and features Triton™ bonded to double the strength of diamond adhesion, improving performance.

Dental Bur - Inverted Cone 33 1/2 - 16mm FG (Feline Length) - 5 Pack Introducing our Inverted Cone 33 1/2 Dental Burs, specifically designed for the intricate needs of feline dental care. Each bur is meticulously engineered with a 16mm short shank, ideal for the limited space within a feline's oral cavity, ensuring precision and efficiency in every procedure. Pack Size: 5 burs per pack

D217 Dental Bur - Xcut Fissure Taper 700 - 22mm RA - 5 pack Xcut Fissure Taper 700 Head Size - 010 Cutting Length - 4.2 ISO: 500.204.168.007.010 Xcut fissure taper right angle (RA) burs have a 22mm long shank and a small notch at the end for locking the bur in place. These burs are suitable for sectioning teeth used in low speed handpieces. Pack of five autoclavable burs. These burs are intended to be single use and the cost factored in to each procedure. D218 Dental Bur - Xcut Fissure Taper 701 - 22mm RA - 5 pack Xcut Fissure Taper 701 Head Size - 012 Cutting Length - 4.2 ISO: 500.204.168.007.012 Xcut fissure taper right angle (RA) burs have a 22mm long shank and a small notch at the end for locking the bur in place. These burs are suitable for sectioning teeth used in low speed handpieces. Pack of 5 autoclavable burs. These burs are intended to be single use and the cost factored in to each procedure. D219 Dental Bur - Xcut Fissure Taper 702 - 22mm RA - 5 pack Xcut Fissure Taper 702 Head Size - 016 Cutting Length - 4.4 ISO: 500.204.168.007.016 Xcut fissure taper right angle (RA) burs have a 22mm long shank and a small notch at the end for locking the bur in place. These burs are suitable for sectioning teeth used in low speed handpieces. Pack of 5 autoclavable burs. These burs are intended to be single use and the cost factored in to each procedure.

Dental Bur - Taper Fissure 169L - 19mm FG (Standard Length). Taper fissure burs are ideal for sectioning teeth and are intended to be single use.